Low beer flow🍺

Daniele Updated by Daniele

Low beer flow🍺

Low beer flow can be due to several causes:

🔦 Oops, it looks like the keg is almost empty🤫

The keg icon on the front of the appliance turns red when less than 0.75 L (0.2 gal.) of beer is left. When the keg is almost empty, the dispense speed slows and eventually stops.

To fix that, please replace the empty keg with a full one✌

🔦 The tap handle isn’t fully opened during dispensing.

To fix that,  please make sure to fully open the tap handle when pouring.

🔦 There's an obstruction in the air channel of the keg closure.

If there is an obstruction, it can be removed by clearing the air channel with a toothpick or something similar. After that, reconnect and try dispensing again.

🔦 The beer tube is deformed.

 The beer tube may have temporarily deformed after a long period of no usage. This problem disappears after a few pours, rest assured😉

Just make sure to verify the beer tube hasn’t buckled (It should extend slightly from the spout).

You can also replace the beer tube if necessary. 

If your problem persists, please contact us on: help-uk@perfectdraft.com

How did we do?

My machine is noisy😫

The tube pops out when connected to the keg.

Contact